The AC Infinity Stainless Steel Pruning Shear 6.6″ is a straight micro-tip hand shear for fine trimming, quick snips and shaping. Stainless steel blades with a Teflon non-stick coating, spring-open handles and a sliding safety lock make it the everyday tool for close, precise work. Quick Bloom Lights is the official Australian importer for AC Infinity: stocked in Sydney, shipped domestically.
Precision micro-tip blades
The straight micro-tip blades come to a fine point, so you can put the cut exactly where you want it — a single leaf, a small side shoot, a stem sitting right against another — without catching what's next to it. The blades are stainless steel with precision-ground edges, and a Teflon non-stick coating stops sticky plant residue building up on them, which is what normally makes small snips gum up and start to drag or jam mid-session.
Spring action and a lighter hand
A spring pushes the handles back open after every cut, so the blades are primed for the next snip without you having to open them yourself. Over a long trimming session that, together with the lightweight body and soft gel silicone grip, takes a lot of the strain out of your hand. When you are done, a sliding lock holds the shear closed, protecting the blade tips and your fingers in a drawer or tool bag.
Pick the right shear
AC Infinity make four hand shears and Quick Bloom Lights stocks all of them. They share the same Teflon non-stick coating, spring-open handles and sliding safety lock; the difference is the blade and what it is built to cut.
| Shear | Blade | Max opening | Best for |
| 6.6″ Straight (this page) | Straight micro-tip, stainless steel | 10° | Precise snips and detail trimming where you can see and reach the cut |
| 6.6″ Curved | Curved micro-tip, stainless steel | 10° | Reaching into dense growth and tight spots without bending your wrist |
| 6.6″ Straight with Cleaning Kit | Straight micro-tip, stainless steel | 10° | The straight shear plus a jar and slotted sponge for wiping residue off between cuts |
| 8″ Bypass | Bypass, drop-forged steel, Teflon-coated | Up to 20°, side switch selects the wider opening | Thicker stems and woody growth, up to 16 mm (5/8 in) |
Full specifications
| Manufacturer | AC Infinity Inc. |
| Product / model | Stainless Steel Pruning Shear 6.6″ / AC-PSA3 |
| UPC | 819137021495 |
| Total length | 16.8 cm (6.61 in) |
| Maximum opening angle | 10° |
| Blade design | Straight micro tip |
| Blade material | Stainless steel |
| Finish | Teflon non-stick coating |
| Mechanism | Spring action, sliding safety lock |
| Handle material | Gel silicone |
| In the box | Pruning shear |
FAQ
Straight or curved — which should I get?
Get the straight shear if most of your cuts are in the open, where you can line the blades up square to the stem. Choose the curved 6.6″ shear if you are often working inside dense growth or at awkward angles; the curve reaches in and saves your wrist. The two work well as a pair.
Can it cut thicker stems?
It is built for fine, precise work — the micro-tip blades open to 10° and are at their best on soft, thin growth. For thicker or woody stems, the 8″ bypass shear is the right tool: it opens up to 20°, with a side switch that selects the wider opening for cuts up to 16 mm (5/8 in).
How do I keep the blades clean?
The Teflon coating does most of the work by stopping residue sticking in the first place; a quick wipe of the blades after a session keeps them cutting cleanly. If you want a dedicated setup, the straight shear with cleaning kit comes with a jar and a slotted abrasive sponge that wipes both blades in one pass.
Is this genuine AC Infinity stock?
Yes. Quick Bloom Lights is the official Australian importer and distributor for AC Infinity. Stock is held in Sydney and ships domestically.