The Digi-Lumen UCL 3 m power cord is the mains lead for the Extreme 200 W under-canopy bar. Three metres of cable, an Australian three-pin plug at the wall end, and a 0–10 V control lead alongside it so the bar can be dimmed from a controller rather than just switched on and off.
Power and control in one lead
Rather than a bare power cord, this carries the 0–10 V dimming signal alongside the mains supply. That is what turns the under-canopy bar from a light you switch on into one you can run on a schedule and dim with everything else in the room — including through an AC Infinity UIS Lighting Adapter Type-A, which handles 0–10 V dimming. Tell us which controller you are running and we will confirm the parts before you order.
The Australian three-pin plug is fitted from the factory, so there is no adapter and no electrician needed to get it running.
Specifications
| Manufacturer | Digi-Lumen |
| Product / model | UCL 3 m Power Cord with RJ Control Cable / DLXUCLPC |
| Cable length | 3 m |
| Plug type | Australian three-pin |
| Control | 0–10 V dimming lead |
| Fits | Digi-Lumen Extreme 200 W Under-Canopy LED (DLXUCL) |
| Warranty | 2 years, QBL-backed |
FAQ
Do I definitely need this?
If you are buying the Extreme 200 W under-canopy bar, yes — it does not come with a power cord. We flag it on the light's own page too, because finding out after delivery is nobody's idea of a good day.
How many do I need if I am running several bars?
One cord powers one bar. If you are linking bars in a row, the 1000 mm extension connection cable carries power and signal between them, so you do not need a cord for every bar — tell us how many bars and how you are laying them out and we will work out the exact list with you.
Can I use any 240 V cord instead?
No. The connector is specific to the Digi-Lumen under-canopy fixture and the lead carries the 0–10 V control alongside the mains. Use the part made for it.