The AC Infinity CLOUDLAB 422 is a 2 × 2 ft grow tent measuring 60 × 60 × 122 cm, built on 22 mm steel poles with a 2000D oxford canvas shell and a diamond mylar lining. At 122 cm tall it fits under a bench, in a cupboard or on a shelf where a full-height tent won't. The frame takes 68 kg (150 lb) of hanging weight, the ports take 100 mm (4″) and 150 mm (6″) ducting, and a controller mounting plate with a light-proof cable passthrough keeps your setup tidy. This is the tent only — no fans, lights or controllers are included. Quick Bloom Lights is the official Australian importer for AC Infinity: stocked in Sydney, shipped domestically.
A better growing environment
The CLOUDLAB 422 gives you complete control of the climate your plants grow in. The shell is waterproof 2000D oxford canvas for durability and light-proofing, and cross-patterned diamond mylar lines the inside walls to reflect your light back onto the canopy.
Built to hold your gear
The frame uses 22 mm steel poles — against the 18 mm poles common on standard tents — with rigid corner pieces and roof hanging bars that carry up to 68 kg (150 lb) of equipment when hung at the intersecting points. A metallic finish protects the steel from long-term wear.
Light-proofing
Inner ribbon stitching seals along the zipper to keep the reflective surface continuous and stop light leaking, and a protective cover runs the full length of the front zip. The duct ports close from either side, and the 25 × 25 cm observation window has a flap you peel back to check progress without opening the tent.
Future-ready design
A controller mounting plate with a passthrough lets you run cables in without a light leak. The tent comes with a waterproof floor tray, a detachable tool bag and extra roof hanging bars. For fresh air, open the air venting screen or pair a floor duct port with an intake fan. Ports: 100 mm (4″) and 150 mm (6″).
Full specifications
| Manufacturer | AC Infinity Inc. |
| Product / model | CLOUDLAB 422 / AC-CBA422 |
| UPC | 819137021532 |
| Tent dimensions | 60 × 60 × 122 cm (23.62 × 23.62 × 47.99″) |
| Duct ports | 100 mm (4″) and 150 mm (6″) |
| Viewing window | 25 × 25 cm |
| Side intake window | 15 × 36 cm |
| Mounting strap length | 140 mm |
| Outer material | 2000D oxford canvas |
| Inner material | Diamond mylar |
| Poles | Steel, 22 mm |
| Hanging weight | 68 kg (150 lb) |
| Hanging bars | 2 (+1 extra) |
| Plant capacity | 1 plant in a 19 L (5 gal) pot |
| Included | Tent, floor tray, detachable tool bag, hanging bars, controller mounting plate |
| Manual | Download PDF |
FAQ
Will it fit my room?
The tent is 60 × 60 × 122 cm assembled. Allow extra clearance above for putting the frame together and for ducting, and room in front to open the door fully.
What size fan do I need?
That depends on your light, the room temperature and whether you run a carbon filter. Our fan size calculator works it out from the tent volume. Duct ports on this tent: 100 mm (4″) and 150 mm (6″).
How much can I hang from the roof?
Allow 68 kg (150 lb) of hanging weight, spread across the hanging bars. Hang heavy items such as carbon filters close to where the bars meet the frame.
Does it come with a fan, light or filter?
No, this is the tent only. If you want the whole setup matched and bought as one order, see our AC Infinity grow tent kits.
Will my tent match the specs listed?
AC Infinity refines the CLOUDLAB range between production runs, so port layout and window sizes can vary slightly from batch to batch. The specs above match the stock we hold. If an exact port layout matters for your setup, message us before ordering and we'll check the unit on our shelf.
Is this genuine AC Infinity stock?
Yes. Quick Bloom Lights is the official Australian importer and distributor for AC Infinity. Stock is held in Sydney and ships domestically.